Build Your Stacker™
Stacker Model Options
-
Stackers Standard Mount - Frosted Acrylic Panel
Stacker Style OptionsRadius corners on all sides, bottom edge of panel sits ½” off workstation panel top cap. Clamp position is adjustable.
-
Stackers Standard Mount - Frosted Acrylic Panel
-
Stackers Flush Mount with radius top corners - Frosted Acrylic Panel
-
Stackers Flush Mount with 90° top corners - Frosted Acrylic Panel
-
Stackers Flush Mount for glass workstation panels
-
Stackers Invisible Mount
-
- Stackers – radius corners on all sides, bottom edge of panel sits ½” off workstation panel top cap. Mounting location is adjustable.
- Stackers Flush Mount with radius top corners – set mounting locations on Stackers panel with no gap fit on workstation panel top cap. Stacker panel has 90° corners on bottom and radius corners on top.
- Stackers Flush Mount with 90° corners– set mounting locations on Stackers panel with no gap fit on workstation panel top cap. Stacker panel has 90° corners on all sides.
- Stackers Flush Mount for Glass Workstation Panels – set mounting locations on Stackers panels. Double Square mounts are used to mount Stackers to glass workstation panels. Stacker panel has 90° corners on all sides.
- Stackers Invisible Mount – permanently mounted. the panel slides over the mount through a slit on the underside of the panel. Once the panel is installed the mount is invisible.
Stackers™ Materials and Finishes
-
Frosted Acrylic FRO
Acrylic
-
Frosted Acrylic FRO
-
Clear Acrylic CLR
-
-
Ash P100
EchoScape 3/4″ (18MM)
-
Ash P100
-
Charcoal P101
-
Cobalt P102
-
Pear P103
-
Sandstone P104
-
Slate P105
-
Iced Grey P106
-
Linen P107
-
-
Ash P100
EchoScape 3/8″ (9MM)
-
Ash P100
-
Charcoal P101
-
Cobalt P102
-
Pear P103
-
Slate P105
-
Iced Grey P106
-
Linen P107
-
Ruby P108
-
Tangerine P109
-
Violet P110
-
Sunflower P111
-
Green Apple P112
-
Cornflower P113
-
Aqua P115
-
Choose Your Mounting Option
-
Permanent
Tower Mount
Stackers Mounting
-
Tower Mount
-
Tower Adhesive Mount
-
Tower Magnet Mount
-
Tower Small Clamp-On Mount
-
Tower Medium Clamp-On Mount
-
Tower Large Clamp-On Mount
-
Square Mount
-
Square Adhesive Mount
-
Invisible Mount
-
Invisible Adhesive Mount
-
- Tower Mount – Permanent screw down mount for installation on flat top cap.
Minimum top cap width – 1.50” - Tower Adhesive Mount – For use on Clear or Frosted acrylic and 3/8″ (9mm) acoustic EchoScape panels. Adhesive is used to attach metal plate to top cap. Aluminum cover snaps into metal plate and Tower Mount is screwed into cover. For installation on flat top cap. Minimum top cap width – 1.625”
- Tower Magnetic Mount – For use on Clear or Frosted acrylic panels and 3/8″ (9mm) acoustic EchoScape panels. Removable Magnet Mount is made from neodymium magnet for installation on a flat panel top cap. Minimum top cap width – 1.50”
- Tower Small Clamp-On Mount – For use on Clear or Frosted acrylic and 3/8″ (9mm) acoustic EchoScape Stackers and Stackers Flush Mount panels. Removable clamp-on mount can be used on flat or curved gallery panels 1.0″ – 1.62″ in width. Tower mount attaches and holds the clamp-on brackets to the proper width creating a tight tension fit.
- Tower Medium Clamp-On Mount – For use on Clear or Frosted acrylic and all acoustic EchoScape Stackers and Stackers Flush Mount panels. Removable clamp-on mount can be used on flat or curved workstation top caps . Adjustable tension mount fits workstation top caps 1.9″-3.0″ in width. Tower mount attaches and holds the clamp-on brackets to the proper width creating a tight tension fit.
- Tower Large Clamp-On Mount – For use on Clear or Frosted acrylic and all acoustic EchoScape Stackers and Stackers Flush Mount panels. Removable clamp-on mount can be used on flat or curved workstation top caps . Adjustable tension mount fits workstation top caps 2.9″-4.0″ in width. Tower mount attaches and holds the clamp-on brackets to the proper width creating a tight tension fit.
- Square Mount – Permanent screw down mount for installation on radius or flat top cap. Minimum top cap width – 0.875”
- Square Adhesive Mount – For use on Clear or Frosted acrylic and 3/8″ (9mm) acoustic EchoScape panels. Adhesive is used to attach metal plate to top cap. Aluminum cover snaps into metal plate and Tower Mount is screwed into cover. For installation on flat top cap. Minimum top cap width – 1.625”
- Invisible Mount – For use with 3/4″ (18mm) acoustic EchoScape. Mounting locations are preset and posts side into panel for invisible mount on flat top cap. Minimum top cap width – 0.75”.
- Invisible Adhesive Mount – For use with 3/4″ (18mm) acoustic EchoScape. Mounting locations are preset and posts side into panel for invisible mount. Adhesive is used to attach metal plate to flat topcap. Aluminum cover snaps into metal plate and Invisible Mount is screwed into cover. Minimum top cap width – 1.625”.
Product Information
Production Lead Time | Call for current lead times |
Freight | Free Shipping on 10 or more of any product. See our freight program for more information. Freight Program |
Fully Customizable | Additional sizes, shapes, core materials, mounting options possible. Call, email or chat with us online for more information. |